Bosch Beton - Kwaliteit sleufsilo bij familie Østergaard in Vejen (DK)
HomeProjectsDanish dairy farmers go for quality

Danish dairy farmers go for quality

The two Østergaard brothers from Vejen in Denmark had a new Bosch Beton silage clamp placed to optimise their dairy farm.


The two Østergaard brothers have been running the dairy farm for thirteen years and now have some 700 dairy cows. To survive as farmer, you need to optimise milk production. Bosch Beton placed a new silage clamp on the farmyard run by the two brothers. Our L250 retaining walls with heel were used for the silo. The farmers are delighted with their new silage clamp. The new, wider silo is also a step towards the optimisation they had in mind.


The dairy farmers previously purchased a silage clamp from another supplier. They’d heard good reports about the Bosch Beton silage clamp and as the best quality is the most economic solution in the long term, they selected our silage clamp.

Good silage clamp

Good roughage is the basis for everything and means improved milk production from the cow. A good silage clamp is important to ensure reduced loss and to limit the buying in of additional roughage. A Bosch Beton silage clamp will also last for generations, which more than recoups the cost of investment.

Further information

If you would like to know more about this project or our customised retaining wall solutions for silage clamps, please feel free to contact our consultants.

Build your silage clamp

Using our 3D generator, you can build your own silage clamp in three steps Decide what you are going to use the silo for, select a silage clamp wall type, and enter the dimensions of your silage clamp along with the axle weight. Make a selection for the paving of the farmyard, and any accessories and services required. You will receive a customized recommendation free of obligation within three working days of receipt of your application. If you would rather have personal advice, please contact our team.